HOBBY: Speed Sculpt Fur Cloaks W/ Green Stuff
Here’s a video of how you can speed sculpt fur cloaks out of green stuff in a matter of minutes. Super clean and super easy!
If you follow this tutorial you can make any miniature look dope with a custom made fur cloak.
So we are going to start by mixing about 1 part yellow to 4 parts blue to make our green stuff and get it ready for the mold.
This fur mold is from Micro Art Studios.
Next we take the mold, and we put the green stuff on in a random fashion and lightly mash it down to make sure we get good detail in the green stuff.
After we are confident we have pushed enough to get all the detail we carefully pull the green stuff off the mold and place it gently onto our mini, making sure not to smash any detail with our fingers in the process.
Next take an X-Acto blade and gently press to cut the cloak off where you want it and peal away the excess.
Then take the blade and gently cut in some detail around any flat parts that need cleaned up a little.
Once you have it the way you want it to look then you’re done and you just have to let the green stuff dry. It’s that quick and that simple!
